Beach Buddy, Paumco Products, Weed Rake, Lake Weeds, Weed Roller, lake rake on wheels, lake rake, lake weed rake, pond rake, pond weed rake
The Beach Buddy is a truly revolutionary product that reduces the effort required to manage the weeds and debris on the bottom of your swim area or washed up on your beach (yes - it works for raking major debris from your sandy beach).
Simply wheel the 40inch wide unit into the lake with the tines and sickle in the UP mode. Once the Beach Buddy is in the area you want to transform, twist the handle, dropping the sickle and rake tines to the bottom of the lake.
As you pull the Beach Buddy to the shoreline it scrapes the bottom dragging weeds, algae, sticks and garbage to the shore. Twist the handle, lifting the tines and leaving the debris on the beach! No back-braking lifting! No callouses from raking!
Purchase additional extensions and wheel up to 27ft into the water without getting wet!
ASK ABOUT OUR DAILY RENTAL RATES - only in Minnesota
(includes 80" of handle - additional 40" extensions $15 each)
Test drive in Plymouth MN
For more information: email info@WeedersDigest.com or call 763-551-1441 to place an order
By twisting the handle you can raise or lower the tines. By an easy twist of the handle this will raise the 16 tines, then roll the Beach Buddy to the exact location in the water, that you want cleaned, then simply twist the handle back. By twisting the handle, the tines are lowered. Pull the Beach Buddy back slowly to shore then twist the handle again to raise the tines and the weeds will slide off the tines and be left at the shore. You are now ready to roll it back out to the weeds.
The wheels have holes in them to allow the water to enter while going into the water, and allowing water to escape while leaving the water. This feature keeps the Beach Buddy on the bottom all the time. The large wheels 3" x 20" high allow Beach Buddy to easily roll on land or in the water.
This self cleaning non-motorized machine is completely built to last. The frame and the cover are built of steel & powder coated to withstand many years of use. The tines are made of carbon steel and are heat treated for strength, then chromate plated. The Wheels are made of rugged polyethylene. The handle & extensions are galvanized steel tubing.
After trying the Beach Buddy, you will agree that this is with no doubt the easiest way to get rid of those unwanted weeds without herbicides and strenuous labor. You'll be amazed at how simple weed removal can be.
The Beach Buddy Features
Self-cleaning tines
Rolls easily
Non-motorized
Durable powder coat paint
Rugged polyethylene wheels
Environmentally safe
Specifications
Weed Wheeler comes with a 16" wide T-Handle:
Powder coated
Soft cushion grips
Includes cutter blade
2 - 40" galvanized steel extension with post locking pins (additional extensions are available - see below)
Total Weight 53 lbs. (without handle)
16 - 5/16" steel tines:
Heat treated for strength
Chromate plated to resist corrosion
Wheels are 20" high x 3" wide
Approximate total width 38 1/2" outer wheel to outer wheel
All screws, nuts & washers are stainless steel or nickel plated Beach Buddy, Paumco, Weed Rake, Lake Weeds, Weed Roller, lake rake on wheels, lake rake, lake weed rake, pond rake, pond weed rake
