Our pellets combination of natural technologies is a simple cost-effective method for continuous sludge management.
• Biodegradable pellet
• Contains sludge-eating bacteria, sludge-eating enzymes and trace minerals
• Improves water clarity
• Naturally eliminates odor-causing muck on beaches
• No gypsum fillers
Our Sludge and Muck Digester Pellets work on the bottom of your lake or pond, so you won't have to.
All new value-added bacteria pellets, were designed for lagoons, lakes and ponds as a low-maintenance solution for sludge bed and suspended solids removal, water clarity and beach clean-up.
These pellets are fortified with specialized bacterial strains that are high volume waste consumers of muck and organic matter. These pellets have a broad trace mineral base and an organic catalyst to increase the productivity of the beneficial bacteria in each pellet. The pellet itself was specially designed to drive the active ingredients down to the sludge so the dose isn't consumed by the water column.
NOTE: Water temp must be at least 60 degrees to apply
Spot Treatment for around a pier, beach or problem area:
Use 8# per week for 4 weeks; then 2# every other week as needed; at this rate 50# will treat up to 4,000 sq ft for a five month season.
Total Coverage for water body treatment:
125# per surface acre (3.0# per 1000 sq ft), Broadcast pellets uniformly over surface; Use 2 – 4 times per year.
For Optimum Results
• Use as directed
• Apply when ambient temperature is 50°–90° F; dissolved oxygen level is over 1.0 ppm; pH is 6 – 8; alkalinity is less than 100 ppm
• Proper aeration will enhance product performance
In use pH Range Neutral
Solubility in Water Partially soluble
Appearance Light tan pellets
Packaging, Handling and Storage
Size Dimensions (LxWxH) Weight
10 pound Pail 12" x 12" x 12" 12 lbs
25 pound pail 13" x 13" x 16" 28 lbs
Store this product out of direct sunlight in a cool dry area. For best results, use within 12 months. Request MSDS for more specific information.
Purchase the ONE POUND SAMPLER for your own testing $10 (limit one per customer)